BLUETOOTH姞 HANDS-FREE PHONE SYSTEM (Without Navigation
System – if so equipped)
With an overhead microphone and sound
transmitted through the audio system
speaker, the Bluetooth姞 Hands-Free Phone
System utilizes Bluetooth姞 wireless technol-
ogy and voice recognition to provide hands-
free cellular phone communication.
SYSTEM OPERATING TIPS
䡲 Close all windows. Surrounding noises
may interfere with system operation and
performance.
䡲 Press the
button on the steering wheel to activate voice recognition.
䡲 Wait for the tone before speaking.
䡲 Begin speaking a command within 5 seconds of the tone.
䡲 To go back to the previous command, say “Go back” or “Correction.”
䡲 To cancel a voice recognition session, simply wait 5 seconds, say “Cancel” or “Quit,” or
press the
button.
䡲 To increase or decrease the volume of the voice prompts, push the VOL (volume) control
switch up or down on the steering wheel or turn the ON·OFF/VOL (volume) knob on the
audio system while the system is responding.
䡲 Speak in a clear and natural voice without pausing between words.
䡲 If the Voice Recognition system does not recognize your voice commands, train the
system using the Speaker Adaptation Mode. Refer to your Owner’s Manual for a list of
commands and further instructions.
䡲 Some commands are not available while the vehicle is in motion.
䡲 The “Help” command can be used in any menu to hear a list of available commands.
䡲 Please refer to the cellular phone manufacturer Owner’s Manual for detailed information
regarding your Bluetooth姞 phone.
䡲 For recommended phones and detailed instructions, please visit
www.nissanusa.com/bluetooth .
PAIRING YOUR PHONE
To use the hands-free feature, you need to set up, or pair, the system to recognize your
compatible cellular phone(s). Five Bluetooth姞-enabled phones can be paired. After setup,
the system automatically connects with a paired phone when the ignition switch is in the
ACC or ON position, as long as the phone is on and in the vehicle.
27
Comments to this Manuals